Clear Garage Flooring

These garage floor rolls are manufactured from pure, commercial-grade, 100% polyvinyl and will not absorb liquids, even if they're on the mat for an extended period and not cleaned or dried.  Should you want to remove the moisture (though not at all necessary) a dry cloth, mop or rag will do the trick!

Although incredibly strong, garage flooring rolls can easily be cut to fit with a utility (razor) knife with a sharp blade.  It's best to mark the matting with a pencil (and a straight edge or ruler) and then cut along the line for a perfect fit.  Cutting the garage matting will not damage or deteriorate the remaining material.

Garage flooring rolls can safely be used on top of epoxy flooring (whether new or old) and not negatively react with or damage the flooring.

Absolutely!  There are no toxic ingredients or harmful odors associated with these mats and are rated safe for humans and animals, for use indoors in both commercial and residential locations.  Should any particular information be needed, a spec sheet with pertinent rating information can be sent to you.

Certainly - all of our garage flooring products can safely be installed on top of any type of radiant flooring without any concern for the matting or the floor below.

A kick stand / center stand will not damage the garage flooring and can safely be parked on top of this roll material without worry.

Sweeping or vacuuming will remove most of the day-to-day dirt, dust and debris that gets tracked onto these garage mats.  A blower can also be used to blow everything out of the garage quickly and efficiently.  For mud, gum or more stubborn stains, using warm water and a little liquid soap should do the trick.  Engine fluids should not eat through the mat but if there is a spill on the mat, it's best to clean it up quickly.  Although very unlikely, it's possible that a stain could appear on a light colored mat from extended exposure to strong chemicals or road tar.

These garage roll mats can easily be cut with a utility knife.  After laying out the mat, mark the area needing to be removed and then trace the same mark with the knife.  Once removed, the matting will still continue to function properly without premature deterioration.

Roll-out garage flooring is designed for heavy-duty use and can withstand a wide variety of applications including use in a trailer (including a horse trailer) and under tractors.  These rolls are stain, mildew and fade resistant, have a textured surface for enhanced traction and can easily be cut down to fit the contours of the floor of the trailer.  (Please note that we recommend gluing the garage flooring down for use in any trailer to ensure the matting stays securely in place).

There are a few options for seaming two (or more) garage mats.  The first and easiest option is to simply overlap one roll onto another.  Take one roll and overlay 3-6" on top of the second roll.  Another way to connect two rolls is to use the Garage Floor Matting Center Connectors. Slide each roll into one end of the connector which grabs and holds onto the matting on both sides. Lastly, the matting can be seamed using the Garage Floor Mat Seaming Tape. This option gives the cleanest looking seam. After cleaning the edge of the first mat, roll it back and attach the double-sided tape to the underside, leaving roughly half of it exposed and protruding from the edge. After putting the first mat on the floor lift the second roll, clean the back edge and set it so that it lines up with the edge of the first roll. Although a little more work, this gives a smooth, seamless look with the tape being hidden from view underneath both mats.

Clear Garage Flooring rolls weigh about 0.6 lbs per square foot.  This durable, commercial-grade matting is heavy-duty enough for constant traffic but easy enough for one person to install (or, perhaps two people for larger, 10' wide rolls).